Description
VOOPOO DRAG X VAPE KIT
VOOPOO presents a powerful pod mod in an elegant design. DRAG X combines a quality zinc alloy with leather, which gives it a unique look among other plastic or metal e-cigarettes. This powerful pod mod works on a single 18650 battery (not included). You have complete freedom in which battery to use, how strong and with what capacity. In addition, the battery can be replaced with a fully charged one at any time, or the battery can be charged directly in the device via the USB-C port.
Inside the mod is a new generation of GENE.TT chip, which offers extremely fast response and immediate heating of the coil, which is important for proper evaporation of e-liquid and a pleasant enjoyment of vaping. You will use a sufficiently large and clear display for control, which is full of information about the set power, measured resistance, output voltage, number of puffs and the remaining capacity of the battery. Newly, the DRAG X is also equipped with a unique SCORE mode, which records the point scores of your puffs according to the amount of vapor created.
In addition to the device, the package also includes a plastic pod with a volume of up to 4.5 ml. Pod serves not only as a tank for e-liquid, but also as a mouthpiece and at the same time a heating head is installed in it. It does not have to be screwed into the pod, you just need to slide it in. Two sub-ohm heating heads are included, both designed for direct lung vaping. While with the VM6 head and 0.15Ω resistance you can use almost all the power of the DRAG X pod mod, with the 0.3Ω head you will enjoy more comfortable DL vaping with medium wattage.
Package contents and parameters
1x DRAG X mod
1x DRAG X pod 2,0ml
1x heating head PnP-VM6 0.15Ω (60W-80W)
1x heating head PnP-VM1 0.3Ω (32W-40W)
1x USB-C cable
Package contents may change.
Dimensions: 95mm x 32.5mm x 28mm
Variable wattage: 5W-80W
Output voltage: 3.2V-4.2V
Supported modes: VW
Supported resistance: 0.1Ω-3Ω
Battery: 1x 18650 (at least 20A) – not included
Charging: USB-C port
Material: zinc alloy, PCTG
Â
Pod mod
The powerful pod mod works on a single 18650 battery (not included). The battery is inserted into the device via the bottom door. You can charge it directly in the mod via the USB-C port. The body is made of zinc alloy and the panel is available in leather or carbon fiber.
Â
Control
The DRAG X is controlled by color displays and three buttons. The device offers SMART and RBA modes, which you can easily switch between. The power can be set up to 80W and using the buttons you can easily lock the device or reset the puff counter. The new SCORE function scores points for each of your puffs and assigns ranks for a certain number of points.
Heating heads
DRAG X is compatible with a wide range of PnP heads, which offer different resistances and different recommended wattages. The package includes two heating heads, one VM6 with a resistance of 0.15Ω and the other VM1 with a resistance of 0.3Ω. Both are designed for direct lung vaping into the lungs. You simply slide the heating head into the pod, there is no need to screw it in any way.
Filling
To fill the plastic pod, it is necessary to slide it out of the battery and turn with the mouthpiece down. After opening the silicone cap, up to 4.5 ml of e-liquid can be filled in the pod.
Key Features:
- Powerful Performance: The Drag X is powered by a single 18650 battery, allowing it to deliver up to 80W of output power.
- Advanced Chipset: It is equipped with the GENE.TT chipset, which provides fast ignition speed, stable performance, and various safety protections.
- Innovative Pod System: The Drag X uses a pod system that can hold up to 4.5ml of e-liquid. The pods are compatible with PnP coils, offering versatility for different vaping styles.
- Adjustable Airflow: The device features an adjustable airflow system, allowing users to customize their vaping experience.
- Elegant Design: The Drag X has a sleek, ergonomic design with a leather grip and metal frame, making it comfortable to hold and stylish in appearance.
- User-Friendly Interface: It comes with a clear, user-friendly display screen that shows essential information such as wattage, battery level, and coil resistance.
Specifications:
- Dimensions: 95mm x 32.5mm x 28mm
- Output Power: 5-80W
- Battery: Single 18650 (not included)
- Pod Capacity: 4.5ml
- Coil Compatibility: PnP coils (range of resistances available)
- Charging: USB Type-C
What’s Included in the Kit:
- 1 x VOOPOO Drag X Device
- 1 x PnP Pod (4.5ml)
- 1 x PnP-VM1 0.3Ω Coil
- 1 x PnP-VM6 0.15Ω Coil
- 1 x USB Type-C Cable
- 1 x User Manual
Contains:
- Â Drag X Plus Device
- Â TPP Pod Tank (5.5 ml)
- Â TPP-DM1 coil 0.15 ohm
- Â TPP-DM2 coil 0.2 ohm
- Type C USB cable
- Â User Manual
VOOPOO DRAG X PLUS VAPE KIT now in Ireland
DRAG X POD VOOPOO
Voopoo proposes a pod mod which is particularly successful in aesthetics and technique with the Drag X. Functioning with a 18650 battery (non-included), it allows you to vape depending on your choice of the moment or what you are used to in direct or indirect inhaling with the simple adjustment of air, simple and efficient. Compatible with all the PnP Voopoo (like the Vinci Pod), it is delivered with the PnP 0.15Ω and 0.30Ω coils which allows you to see what the pod is capable of.
Made with several types of material such as zinc, leather or PCTG for the reservoir, the Drag X is also aesthetic as well as robust. The compact size and figure allows you to carry the pod everywhere. It has an output power of 80 watts, the Drag X has the GENE TT chipset which recognises the installed coils and proposes the adapted power for vaping.
To whom addresses the Drag X Voopoo ?
The Drag X addresses those who wish to have a polyvalent vape (direct / indirect inhaling) and for a longer vape. More Energy ? Change the battery and start. The Drag X addresses vapers in search of a small sized mod but also powerful. The PnP coils which are included, power of the mod and the performances are expected. The capacity of e liquid is also consequent with a good reservoir of 4.5ml.
Elegance
Dressed in leather and slender, the Drag X Pod is successful in aesthetics. Made with different materials, zinc alloys, leather and PCTG for the reservoir, the Drag X pod is also elegant as well as ergonomic with a figure which finds its place comfortable in the hand. The coating prevents scratches and shocks.
Power and performances
With the 18650 battery, the Drag X pod offers a maximum output of 80 watts, ideal for the PnP coils. The GENE TT chipset is modern and reactive. It activates in 0.001 second. It automatically recognises the coil installed, so it does not get damaged with excessive power.
Compatible 18650
It is via the retractable hatch under the pod which installs the 18650 battery. The Drag X can also be completely recharged with the USB-C Cable.
Smart ventilation
Depending on your choice of the moment or your daily use, the Drag X can offer an aired pull, half aired or tight pull. It disposes of a perfect setting which is accessible at the front of the pod and you will discover different sensations and experiences.
A robust reservoir
With the Drag X Pod, it has a real clearomiser which is equipped in the Pod. Compatible with the PnP Voopoo coils (like the Vinci Pod), the coils included with the Drag X slides into the reservoir without any screws in the reservoir. The tank is robust with a conception in PCTG which supports the shocks and heat. It can hold up to 4.5ml in e liquid.
Filling of the Drag X Pod:
- Remove the cartridge of the Drag X Pod
- Insert the tip of the pipette in the open hole
- Fill the reservoir
- Re-install the cartridge
PnP Voopoo Coils
The Drag X Pod is compatible with the same coils as the Vinci Pod PnP coils. Indirect inhaling to powerful sub ohm, a vast choice is possible. The pod is also compatible with the reconstructable PnP RBA coils. With the Drag X the following coils are included:
- PnP-VM1 0.30 Ω, to be used between 32 and 40 watts
- Pnp-VM6 0.15 Ω, to be used between 60 and 80 watts
Replacing the coil of the Drag X Pod:
- Remove the cartridge of the Drag X Pod
- Remove the coil from the cartridge
- Insert the new coil into the reservoir
Features of the Drag X :
| Dimensions | 124Â x 28 x 33 mm | Power | 5 – 80 watts |
|---|---|---|---|
| Material | Zinc Alloys/Leather/PCTG | Battery | 1 x 18650 |
| Capacity | 4,5 ml | Chipset | GENE.TT |
| Range of Coils | 0.1Ω – 3.0Ω | Coils | PnP Voopoo |
The Drag X Pod is made by Voopoo.
The Drag X Pod is delivered with:
- 1 Drag X Pod
- 1 Drag X Cartridge
- 1 PnP-VM1 0.3 Ω
- 1 Pnp-VM6 0.15 Ω
- 1 USB-C Cable
- 1 Notice
Discover the Packaging of the Drag X Voopoo
Reviews
There are no reviews yet.